Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Cylinder on Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door lock

See other generations:
Video tutorial

Open the door where you intend to change the lock cylinder. Remove or simply move the door's side seal so you can unscrew the T20 Torx screw.

This allows you to pull the short part of the handle where the lock cylinder is located. Pull the cylinder out and disconnect its connector.

At this point, remove the handle by moving it sideways and then pulling it out. Now you can remove the internal handle support or proceed to reinstall the external handle and the cylinder, working in reverse order.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Exterior Door Handle on the Mercedes E-Class
How to Replace the Exterior Door Handle on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the exterior door handle on the Mercedes E-Class. First, open the vehicle's door and start unscrewing the side screws to remove the lock cylinder,.. …
How to Remove the Ignition Switch from the Mercedes E-Class
How to Remove the Ignition Switch from the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. ignition switch or cylinder in the Mercedes E-Class. First, open the hood and disconnect the battery; then, get inside the vehicle and start by removing.. …
How to Replace the Ignition Cylinder on Mercedes Benz E-Class W124
How to Replace the Ignition Cylinder on Mercedes Benz E-Class W124
Mercedes Classe E (1984-1995 / W124) .. the ignition cylinder on the Mercedes Benz E-Class W124. The first step is to remove the protective plastic from the cylinder. With the key inserted.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos