Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Switch from the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

In this guide, discover how to remove and replace the ignition switch or cylinder in the Mercedes E-Class. First, open the hood and disconnect the battery; then, get inside the vehicle and start by removing the steering wheel airbag, detaching it from the back and disconnecting the electrical connector.

Next, unscrew the center screw of the steering wheel to remove it; then unscrew the retaining ring of the ignition switch and remove the steering angle sensor; finally, push the cylinder to remove and replace it!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to remove the ignition lock of the Mercedes E-Class.
How to remove the ignition lock of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. remove the ignition switch of the Mercedes E-Class, model W 211, produced from 2002 to 2009. To carry out the removal on your own, we need to use.. …
How to Reset the Service Light on the Mercedes E-Class?
How to Reset the Service Light on the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To reset the Service light on the Mercedes E-Class, turn on the ignition by rotating the key in the ignition switch: once the dashboard is lit up,.. …
How to Reset the Automatic Transmission of the Mercedes E-Class?
How to Reset the Automatic Transmission of the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. the automatic transmission of the Mercedes E-Class, insert the ignition key into the ignition switch. Once the dashboard lights up, press the accelerator.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos