Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Clock adjustment on Mercedes E-Class w211

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Instrument cluster
Operation: Clock adjustment on Mercedes E-Class w211

Insert the ignition key and turn on the instrument panel (not the engine, not necessary). On your steering wheel and on your left you will find the menu button: press it several times, until you reach the settings page. Now that you are there, press the up arrow until you see the item "time and date", press the buttons this time on your right + and -, and enter this section (time and date) with the up arrow. Always with the same buttons, set the time and that's it. Exit the main screen, turn off the ignition and turn it on again to verify the correctness of the procedure.


Posted on 27 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe E 2002-2009 - What does the SRS error on the Mercedes E-Class W211 indicate? Read Answer
    • Classe E 2016-2023 - How to solve the AdBlue problem on Mercedes w213? Read Answer
    • Classe E 2009-2016 - What does the yellow engine light in Mercedes E-Class W212 mean? Read Answer
    • Classe E 2002-2009 - How does the light on the airbags of the Mercedes Benz E-Class w211 go out? Read Answer
    • Classe E 2009-2016 - What does the engine light on the Mercedes E-Class W212 indicate? Read Answer
    • Classe E 2009-2016 - How to connect bluetooth in the Mercedes E-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos