Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cover and Turn Signal of the Side Mirror on Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side mirror

See other generations:
Video tutorial

As shown in the video, first, loosen the mirror frame by hand, working carefully. Using a plastic wedge, pry in the gap of the mirror cover until you remove it. If you only need to replace the cover, proceed in reverse.

If you need to replace the LED light that serves as the turn signal, access the cover from the inside and unscrew the T10 Torx screws. Using the plastic lever again, detach the adhesive part of the cover that rests on the turn signal.

Remove it and replace it, or just replace the internal light.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Turn Signal from a Mercedes C-Class Mirror
How to Remove the Turn Signal from a Mercedes C-Class Mirror
Mercedes Classe C (2007-2013 / W204) .. do you remove the turn signal from a Mercedes C-Class mirror? Let's see how to take out the turn signal from inside the exterior mirror. Disconnect the.. …
How to Replace the Turn Signal Bulb in the Mercedes C-Class Mirror
How to Replace the Turn Signal Bulb in the Mercedes C-Class Mirror
Mercedes Classe C (2007-2013 / W204) .. the external rearview mirror of the Mercedes C-Class. First, move to the outside of the vehicle and start by removing the mirror glass, then detach.. …
Replacement of the turn signal lights in the exterior rearview mirror of the Mercedes Class C.
Replacement of the turn signal lights in the exterior rearview mirror of the Mercedes Class C.
Mercedes Classe C (2000-2007 / W203) .. of the exterior rearview mirror of the Mercedes Class C. First, let's move to the side and gently detach the cover of the exterior rearview mirror by.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos