Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Central Display of a Mercedes A-Class 180

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Onboard computer

In this video tutorial, you will see how to remove the central display (dashboard computer) of a Mercedes A-Class 180 third generation. First, get inside the vehicle and grab a screwdriver. Then, open the two plastic covers located on the back of the display and remove the two screws underneath. At this point, you will notice that the display will start to move; simply pull it forward to extract it, disconnecting the electrical connector found on the back and the antenna cable. If desired, remove the mounting bracket by unscrewing the screws!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the alternator of the Mercedes A-Class 180
How to disassemble the alternator of the Mercedes A-Class 180
Mercedes Classe A (2012-2018 / W176) In this guide, we will see the instructions useful for disassembling and replacing the alternator of the Mercedes Class A 180. First, we open the car…
Replacement of the thermostat of the Mercedes A-Class 180
Replacement of the thermostat of the Mercedes A-Class 180
Mercedes Classe A (2012-2018 / W176) Today we will discover the instructions that will allow us to disassemble and replace the thermostat of the Mercedes Classe A 180. First, we open the…
How to replace the V-belt of the Mercedes A-Class 180
How to replace the V-belt of the Mercedes A-Class 180
Mercedes Classe A (2012-2018 / W176) .. and replace the V-belt of the Mercedes A-Class 180. First, open the hood of the car and start loosening the belt tensioner lock using a wrench;.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos