Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : How to remove the steering wheel of a Mercedes SLK

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Steering wheel
Operation: How to remove the steering wheel of a Mercedes SLK

Before starting, we will have to go and sit on the driver's seat of our Mercedes C-Class. So let's start by unscrewing and removing the screws that secure the airbag to the steering wheel. Next, we will have to disconnect the electrical plug of the airbag. Once this is done, we will have to remove it from the steering wheel, and we will have reached the nut that fixes the steering wheel to the steering column. We then proceed by unscrewing and removing the nut in question. At this point, we will have to disengage and remove the steering wheel from the steering column. When we have completed this last step, the disassembly will be complete.


Posted on 10 February 2024 by ScegliAuto



How to replace power steering oil on Mercedes Slk
Mercedes Slk (2004-2011 / MK 2, R171) How to do maintenance on the steering of a Mercedes SLK? Does the steering come hard in rotation? We change the power steering oil to solve the probl
Service reset on Mercedes SLK 350
Mercedes Slk (2011-2016 / R172, MK 3) Let's see how to perform a service reset on a Mercedes SLK (2011-2016). We begin the procedure by turning on the vehicle's instrument cluster without
How to adjust the time in the Mercedes SLK?
Mercedes Slk (2004-2011 / MK 2, R171) In this tutorial we can see how to adjust the time in the Mercedes SLK, an extremely simple and fast operation, to be carried out for example after d

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos