Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on the Mercedes Vito MK2

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

This video shows how to remove and replace the battery on the second generation Mercedes Vito in simple and quick steps. First, access the battery compartment by removing the outer cover (turning the small knob); then unscrew the fixing screws found at the base of the battery holder, thus extracting the battery as shown in the video.

At this point, unscrew the terminal screws (positive and negative) and completely remove the battery, replacing it with a new one (of the correct type); then install the new one and reassemble everything!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
How to recharge or replace the battery of the Mercedes Vito
How to recharge or replace the battery of the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Below are the main instructions for replacing or recharging the battery of the Mercedes Vito. First, we open the front door on the driver's side and …
How to replace the battery of the Mercedes Vito W639 2012
How to replace the battery of the Mercedes Vito W639 2012
Mercedes Vito (2003-2013 / MK 2, W639) If the battery of your Mercedes Vito W639 (2012) has stopped working or if it is simply too old and often discharges, you just need to follow the ste…

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the Mercedes Vito auxiliary battery located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos