Do it yourself
Frequently asked questions about cars and motorcycles

How to Check the Electrical Lines on the Fuel Pump Module of the Mercedes C-Class?

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Fuel pump

See other generations:
Video tutorial

To check the electrical lines on the fuel pump module of the Mercedes C-Class, first disconnect the battery. To access the fuel tank, remove the rear seat.

Move the side felt and unscrew the bolts of the underlying cover. Once the cover is removed, disconnect the connector and then the fuel line, being careful of any leaks.

At this point, you can unscrew the retaining ring to access the fuel pump module. You will need to replace the gasket, taking care with the electrical wires.

Finally, reassemble all the removed parts.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) .. fuel pump and its filter on a Mercedes-Benz C-Class. First, lift the rear of the vehicle slightly and begin by removing the fuel filter, disconnecting.. …
Mercedes Classe C (2007-2013 / W204) .. and replace the fuel pump on the Mercedes C-Class. First, open the rear doors and start by removing the rear seat by lifting it up; then remove the.. …
Mercedes Classe C (2007-2013 / W204) .. and replace the fuel tank of the Mercedes C-Class. First, lift the vehicle and start removing all the mounting screws of the two fuel tanks; then.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos