Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Battery on a Mercedes-Benz B-Class 200

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Battery

See other generations:
Video tutorial

This description provides the main instructions on how to remove and replace the battery on a first-generation Mercedes-Benz B-Class. First, locate the battery, which is not typically found under the bonnet but rather in the floor of the front passenger side; open the front door and remove the carpet-covered cover by turning the plastic cap, as shown in the video.

At this point, access the fuses and the battery compartment, where you will disconnect the two terminals (positive and negative) to extract it and replace it with the correct type.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Thermostat of the Mercedes B-Class 200?
How to Replace the Thermostat of the Mercedes B-Class 200?
Mercedes Classe B (2011-2019 / MK 2, W246) .. and replace the thermostat of the Mercedes B-Class 200. First, raise the vehicle and begin draining the engine coolant by disconnecting the radiator.. …
How to Replace the Steering Wheel Controls of a Mercedes-Benz B-Class
How to Replace the Steering Wheel Controls of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the steering wheel controls of a Mercedes-Benz B-Class is a very simple operation. Start by disconnecting the battery terminals, first the negative.. …
How to Replace the Battery in a Mercedes-Benz B-Class?
How to Replace the Battery in a Mercedes-Benz B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. to remove and replace the battery in a Mercedes-Benz B-Class, following the instructions below. First, get into the vehicle on the driver's side and.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the battery of the Mercedes B-Class W245 located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos