Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Rear Door Panel of a Mercedes CLK?

Model: Mercedes Clk W209, A209, C209 - Years 2002-2010
Part: Car door

To dismantle the rear door panel of a Mercedes CLK, first remove the plastic clip of the seatbelt. Next, remove the screws securing the seatbelt anchor located at the bottom of the car: this will allow you to completely remove the seatbelt. At this point, lift the seal covering the perimeter of the pillar to move the actuator lever present in this area. Finally, you can fully extract the door panel after removing the cover of the seatbelt housing.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of the Mercedes CLK
How to Remove the Front Door Panel of the Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Today’s steps will show you how to remove the front door panel of the Mercedes CLK. First, open the front door of the vehicle and start by removing t…
Removing the Rear Door Panel of a Mercedes CLK W209
Removing the Rear Door Panel of a Mercedes CLK W209
Mercedes Clk (2002-2010 / W209, A209, C209) In this video tutorial, we will see how to remove the rear door panel on a Mercedes CLK W209. First, open the front door to access the rear panel; th…
How to Remove the Window Switch Button on Mercedes CLK
How to Remove the Window Switch Button on Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Learn how to replace the window switch panel on the Mercedes CLK. Before starting disassembly, disconnect the battery terminals located in the front …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos