Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch Button on Mercedes CLK

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Power window switch

See other generations:
Video tutorial

Learn how to replace the window switch panel on the Mercedes CLK. Before starting disassembly, disconnect the battery terminals located in the front engine compartment. Unscrew the securing screws in the area of the door opening lever and throughout the door panel cover.

Pry around the cover panel and remove it. Unscrew the securing screws behind the door panel. Remove the window switch panel and disconnect the electrical connector from beneath the switch panel plastic.

Install the new piece into the door panel and reattach the cover panel.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on Mercedes CLK Class
How to Remove the Door Panel on Mercedes CLK Class
Mercedes Clk (1997-2003 / A208, C208, W208) How do you remove the door panel on Mercedes CLK Class? Follow this video to proceed. Before starting the disassembly, disconnect the battery termina…
How to Reset the "Service" Light on a Mercedes CLK?
How to Reset the "Service" Light on a Mercedes CLK?
Mercedes Clk (1997-2003 / A208, C208, W208) Hello and welcome back to our page! Today, you will learn how to reset the "Service" light on your Mercedes CLK. Before performing this procedure, it…
Instructions for Removing the Window Switch Panel
Instructions for Removing the Window Switch Panel
Mercedes Clk (1997-2003 / A208, C208, W208) The window switch panel is located on the trim surrounding the gear lever, practically on the centre tunnel. To remove the switch panel, first unclip…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos