Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Window Switch Panel

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Power window motor

See other generations:
Video tutorial

The window switch panel is located on the trim surrounding the gear lever, practically on the centre tunnel. To remove the switch panel, first unclip the trim at the base of the gear lever by prying along the edges.

Once unclipped, you can access the power connector for the switch panel, which must be disconnected, along with the relevant fixing tabs. Use a small screwdriver to pry the tabs to release them and complete the removal of the switch panel, which includes the window switches, the rear bonnet release, and the adjustment for the external mirrors.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Storing Electric Window Switches
Storing Electric Window Switches
Mercedes Clk (1997-2003 / A208, C208, W208) The electric window switches allow for automatic opening and closing of the windows with a single touch, without needing to hold the button throughou…
Instructions for Removing the Mass Air Sensor
Instructions for Removing the Mass Air Sensor
Mercedes Clk (1997-2003 / A208, C208, W208) The mass air sensor, commonly known as the airflow meter, has a fundamental function: it provides the engine management unit with information regardi…
Instructions for Disassembling the Cup Holder Support
Instructions for Disassembling the Cup Holder Support
Mercedes Clk (1997-2003 / A208, C208, W208) The cup holder support is a useful accessory generally integrated into the console or central tunnel: it is a device with a retractable system, and y…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos