Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on the A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

Open the trunk lid, remove the covers, and unscrew the screws (there are four). Then, move to the bottom of the car (if necessary, lift it with a jack) and unscrew the screws located there.

Now comes the difficult part: there is one screw on each side that is hidden by the lower frame, which you will need to move to access these screws (see video). Finally, you can remove the rear bumper and install the new piece by reversing the steps.

As you can see, this is a more complex operation compared to other car models, mainly due to the hidden screws.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seat of the A-Class
Mercedes Classe A (1997-2004 / W168) .. To remove the rear seats of the A-Class, follow these steps. Open the rear door, and on the lower side of the seat cushion, there is a.. …
How to Replace the Key Fob Battery in a Mercedes Benz A-Class
How to Replace the Key Fob Battery in a Mercedes Benz A-Class
Mercedes Classe A (2004-2012 / W169) .. the battery in the key fob of a Mercedes Benz A-Class is a very simple operation that can be done in a few steps on your own. Start the battery replacement.. …
How to Reset the Service Light on a 2022 Mercedes Benz
How to Reset the Service Light on a 2022 Mercedes Benz
Mercedes Classe A (2018-2026 / W177) .. the service light on a 2022 Mercedes Benz A-Class vehicle. To perform the reset, turn on the ignition and immediately press the TRIP A button to.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos