Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Alternator on Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Alternator

See other generations:
Video tutorial

First, lift the bonnet and insert the support rod. Then, for safety reasons, disconnect the two battery terminals (always start with the negative terminal, followed by the positive). Disconnect the duct shown in the video located under the driver's side front.

Undo and then disconnect the alternator power cable, and then remove the bolts securing it to the vehicle. Finally, using a 17 mm spanner, loosen the alternator tensioner and remove the alternator.

Reverse the steps for complete reassembly. Good luck!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Replacing the Alternator on the Mercedes Sprinter MK2 (906)
Replacing the Alternator on the Mercedes Sprinter MK2 (906)
Mercedes Sprinter (2006-2018 / MK 2, W906) In today's video, you will see how to remove and replace the alternator on the Mercedes Sprinter second series (906), following the instructions belo…
Where Are the Fuses in the Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) The fuses in the Mercedes Sprinter are divided among the designated fuse boxes installed in the vehicle: this type of vehicle has two boxes. The firs…
Positioning and disassembly of the internal fuse box of the Mercedes Sprinter.
Positioning and disassembly of the internal fuse box of the Mercedes Sprinter.
Mercedes Sprinter (2006-2018 / MK 2, W906) The information provided in this guide will show us the positioning and disassembly of the internal fuse box of the Mercedes Sprinter. First, we open…

    Frequently Asked Questions

    • Sprinter 2018-2030 - How long does it take to replace the Mercedes Sprinter alternator? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos