Do it yourself
Frequently asked questions about cars and motorcycles

How to Check if the Alternator is Charging on the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Alternator

See other generations:
Video tutorial

In this guide, we will see how to check if the alternator of your Mercedes Sprinter is charging correctly, without any tools, just using the hidden menu of the vehicle. Turn on the instrument cluster and put the key in the second position.

On the left side of the instrument cluster, there are two buttons: one is marked with an "m" and the other with an "o". Use the latter, holding it down until you hear a "beep" (this takes about 15 seconds). When you hear this signal, press the "m" button, which will bring up a menu that you can scroll through (by pressing the "m" button) where you can also check the oil level and battery voltage.

To know if the alternator is charging, check that when you start the engine, the battery voltage increases, indicating that the alternator is charging correctly.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Mercedes Sprinter (2006-2018 / MK 2, W906) In today's video, you will see how to remove and replace the alternator on the Mercedes Sprinter second series (906), following the instructions belo…
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video tutorial, you will learn how to remove and replace the alternator on a Mercedes Sprinter, following the instructions below. First, open…
Mercedes Sprinter (2006-2018 / MK 2, W906) First, lift the bonnet and insert the support rod. Then, for safety reasons, disconnect the two battery terminals (always start with the negative ter…

Other guides you may be interested in

    Frequently Asked Questions

    • Sprinter 2018-2030 - How long does it take to replace the Mercedes Sprinter alternator? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos