Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Cabin air filter

See other generations:
Video tutorial

This simple video explains how to replace the cabin air filter. First, open the passenger side glove compartment, locate the four clips that hold the compartment, and remove them.

Once removed with a proper tool, pry between the dashboard and the compartment to extract it. Once extracted, see where the filter housing is located and remove the cover secured with clips that will allow you to access the filter. Once removed, simply slide the filter towards you to take it out and replace it if necessary.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mercedes Classe E (2002-2009 / W211) The cabin air filter is located on the passenger side, just below the glove compartment; unscrew the screws securing the plastic panel above the kick…
How to replace the cabin air filter on the Mercedes E-Class
How to replace the cabin air filter on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Today we will perform the replacement of the cabin air filter on a Mercedes E-Class model w211. To replace the cabin air filter, we must first get on…
How to Replace the Cabin Air Filter on a Mercedes E-Class
How to Replace the Cabin Air Filter on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) In this video tutorial, we can see how to replace the cabin air filter on a Mercedes E-Class by following a few simple steps: the first thing to do i…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos