Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Water Recirculation Pump

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Pump

This video shows how to replace the water recirculation pump. First, locate where the pump is situated; in this case, it is located just behind the turbine, slightly lower. Once found, remove it from its housing by unscrewing the two bolts that hold it in place. Before completely removing it, close the two inlet and outlet hoses to prevent any water leakage. To close the hoses, you will need special pliers; once the hoses are secured, remove any clamps holding the tubes and proceed to remove the pump itself.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Repairing Auxiliary Water Pump Leak
Repairing Auxiliary Water Pump Leak
Mercedes Classe E (1995-2002 / W210) The auxiliary water pump is generally electrically driven and circulates the heating water. Once you remove the four screws securing the top cap (whe…
Replacing the Fuel Pump on the Mercedes E-Class
Replacing the Fuel Pump on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) In this guide, you will learn the main instructions for disassembling and replacing the fuel pump on the Mercedes E-Class. First, open the rear doors…
Replacing the Coolant Temperature Sensor
Replacing the Coolant Temperature Sensor
Mercedes Classe E (2002-2009 / W211) Open the hood and disconnect the negative terminal of the battery for safety. The sensor is located on the engine block near the water pump. Remove t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos