|
Do it yourself
| |||
| ||||
Replacement of Cabin Fan
Model: Mercedes Sprinter
MK 2, W906
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
This video is currently unavailable
The fan for air circulation inside the cabin is located just behind the glove compartment: to replace it, you need to remove the glove compartment. First, unclip the plastic cover next to the glove compartment door; then open the glove compartment, fully fold it down by unclipping the end tabs, and unscrew the fixing screws of the glove compartment itself to remove it completely. Next, remove the duct part located right in front of the fan and disconnect the connectors attached to the fan to then release it by turning it counter-clockwise (bayonet fitting). Now, fit the new fan correctly and reconnect everything that was previously removed.
Updated on 11 February 2026 by ScegliAuto
Related tutorials
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
Before you can begin, sit in the front passenger seat of your Mercedes Sprinter. Start by opening the glove compartment, then unscrew the screws that…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
Removing the radiator fan from a Mercedes Sprinter is a fairly simple operation. Start by opening the front bonnet, then remove any elements obstruct…
Mercedes Sprinter
(2006-2018 /
MK 2, W906)
The Mercedes Sprinter has three fuse boxes located inside. The first and third fuse boxes are situated within the cabin. Specifically, the first is l…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
