Do it yourself
Frequently asked questions about cars and motorcycles

Removing and Replacing the Battery

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Battery

See other generations:
Video tutorial

This video shows how to remove and replace the battery in your car. First, locate where the battery is situated in your vehicle; in this case, it is located under the rear passenger seat. Proceed to remove the rear seat by simply lifting the two levers on the side of the seat.

Next, you will need to unscrew the bolt of the bracket holding the battery and pull it out; then position the battery to facilitate its removal and unscrew the two terminals to extract it. Once the old battery is removed, install the new one and follow the steps in reverse, ensuring that you have completed the job correctly.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (1995-2002 / W210) Replace the damaged battery in a Mercedes E-Class. Open the trunk of the car (in the Mercedes E, the battery is located in the rear) and uncover the …
Mercedes Classe E (2009-2016 / W212) Do you want to replace the secondary battery on a Mercedes E-Class? Remove the battery from the trunk or from the vehicle's floor. Open the car door …
Mercedes Classe E (2009-2016 / W212) Remove the battery from the Mercedes E-Class? Let's look at removing the battery from inside the engine compartment. Open the car door and pull up th…

    Frequently Asked Questions

    • Classe E 2009-2016 - Where is the battery of the Mercedes E-Class located? Read answer
    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos