Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulb on Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

You will replace the headlight bulb on your 2016 Mercedes A-Class 200. First, turn the wheel on the side where you need to replace the bulb inward. On the fender, find a sliding cover with a latch on the top that needs to be released.

Once the cover is lowered, remove the cap by turning it counterclockwise. Now, also unscrew the socket in the same direction by turning it a quarter turn to extract it. You can now replace the bulb, which is held in place by two clips on the sides.

Reinstall the socket into its housing, put the cap back on, and raise the cover, securing the latch. The bulb has now been changed!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Replacing the Low Beam Bulb on a Mercedes A-Class
Replacing the Low Beam Bulb on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. beam bulb in the front headlight of a Mercedes A-Class. First, open the hood and start by removing the tray located above the headlight; then remove the.. …
How to replace the headlight bulb in a Mercedes-Benz A-Class
How to replace the headlight bulb in a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) .. replace the headlight bulb in a Mercedes-Benz A-Class is to open the hood and turn the wheels inward if you need to replace the right headlight bulb... …
Replacing the Cabin Dome Light Bulb in the Mercedes A-Class
Replacing the Cabin Dome Light Bulb in the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. the cabin dome light bulb in the Mercedes A-Class. First, get inside the vehicle and start removing the light assembly by prying the sides with something.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos