Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure on Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure on the Mercedes B-Class, start by turning on the instrument cluster (without starting the engine). On the display, show the total mileage of the car (if it does not appear, press the button at the top left of the left steering wheel spoke).

When the mileage appears, press the button with the upward arrow once. The display will show a message to press the "R" button located on the left side of the instrument cluster (below the speedometer).

Press the same button once, and now the display will show a message to press the "+" button to accept and the "-" button to reject (right spoke). Press the "+" button to reset; now press the button at the bottom left of the left steering wheel spoke until the total mileage appears.

Finally, you can switch off the instrument cluster, start the car engine, and check that the error message (by checking with the upward arrow) is gone.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe B (2011-2019 / MK 2, W246) .. the tyre pressure light on the Mercedes-Benz B-Class; before executing the reset, ensure that all four tyres are at the correct operating pressure... …
Mercedes Classe B (2005-2011 / MK 1, W245) .. the tire pressure warning light on a Mercedes Class B: the first step we need to take is to turn on the ignition, then from the control panel located.. …
Mercedes Classe B (2005-2011 / MK 1, W245) .. check the tyre pressure on the Mercedes-Benz B-Class W245, you will need an air compressor. Portable ones cost a few dozen pounds and can be easily.. …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos