Do it yourself
Frequently asked questions about cars and motorcycles

Tips for Removing and Replacing Spark Plugs

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Spark plugs

First, perform this maintenance with the engine cold to avoid unpleasant burns. In the case of this vehicle, the ignition coils and spark plug connectors form a single block enclosed in a rectangular plastic element, which is covered by a protective cover; once the protective cover is removed, unscrew the fastening pins of the ignition coils (these are fairly long pins), disconnect the side connector, and pull the entire block upward. At this point, you can proceed with removing and replacing the spark plugs: blow into the spark plug holes before removing them to eliminate any dirt that could fall into the cylinders.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2012-2018 / W176) Before starting, open the hood of your Mercedes A-Class. Begin by unclipping and removing the engine cover. Next, move all the hoses located above th…
Mercedes Classe A (2012-2018 / W176) Let's look at removing the spark plugs on the A-Class. Pull the hood release lever and lift the hood, securing it. Remove the engine cover panel and …
Mercedes Classe A (2012-2018 / W176) Before you can begin, open the hood of your Mercedes A-Class. Start by unclipping and removing the engine cover, then move all the hoses positioned a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos