Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the pollen filter on a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Cabin air filter
Operation: How to replace the pollen filter on a Mercedes C-Class

In this video tutorial we can see how it is possible to replace the pollen filter on a Mercedes C-Class, following some simple steps: the first thing we have to do is to buy a new pollen filter; next step we have to get in the car and turn off the car and pull the handbrake. The cabin filter on this car can be found inside the car; it is necessary to remove the mat on the passenger side and remove the plastic on the side of the footrest, as shown in the video. Once the lateral plastic has been removed, we have to lift the carpet of the footrest; at this point with a T 20 torx wrench we have to unscrew the fixing elements of the filter box cover. Remove the filter element from its seat and position the new cabin filter following the indications of the arrow on the filter itself. Reassemble all parts in reverse order.


Posted on 5 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the cabin air filter of the 2013 Mercedes C220 CDI coupe located? Read Answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class 220 cabin air filter cost? Read Answer
    • Classe C 2007-2013 - Where is the air conditioning filter of the Mercedes CW 204 class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos