Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Climate Control Switch Bulb

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: A/C controls

See other generations:
Video tutorial

To replace the backlighting bulbs of the climate control switches, you need to have the appropriate keys to disassemble the control panel: insert the keys into the designated slots with the bevel facing inwards, push them all the way in to release the retaining springs and slide out the panel; then disconnect the connectors and use a pair of pliers to extract the bulb holder and replace the bulb (T5); then reinsert the bulb holder, connect the connectors to ensure the bulb works, and reattach the panel in its place.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Check Error Codes via Climate Control Commands
Check Error Codes via Climate Control Commands
Mercedes Clk (1997-2003 / A208, C208, W208) Using the climate control commands, you can check for any fault codes: for their meanings, refer to the user and maintenance manual where you can fin…
Replacing T5 Bulbs for Climate Control
Replacing T5 Bulbs for Climate Control
Mercedes Clk (2002-2010 / A209, C209, W209) Using a small flathead screwdriver, detach the plastic trim around the climate control knobs. Unscrew the two fixing screws of the climate control su…
Replacing the Radio on a Mercedes CLK
Replacing the Radio on a Mercedes CLK
Mercedes Clk (1997-2003 / A208, C208, W208) Using a plastic wedge, remove the base of the gear knob from its housing and disconnect the connectors. Slightly unscrew and pull the gear knob and g…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos