Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Throttle Body on a Mercedes C-Class?

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Throttle body

In this tutorial, you will see how to remove the throttle body on a Mercedes C-Class, a very simple and quick operation to perform if you need to clean or replace it. First, open the hood. Then, disconnect the upper duct, the intake manifold, and the air pressure sensor. Next, remove the screws indicated with a T25 Torx wrench and separate the throttle body from the engine. At this point, you can proceed with cleaning or replacing it, and reassemble everything by following the exact reverse procedure.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the throttle body of the Mercedes C-Class?
How do you replace the throttle body of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. to replace the throttle body of the Mercedes C-Class, you need to open the hood so that you can access the components located inside the engine compartment:.. …
How do you replace the throttle body of the Mercedes C-Class?
How do you replace the throttle body of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. to replace the throttle body of the Mercedes C-Class, you will need to open the hood to access the components inside the engine compartment: here you.. …
Throttle Body Cleaning Instructions
Throttle Body Cleaning Instructions
Mercedes Classe C (1993-2000 / W202) The throttle body is located at the entrance of the intake manifold and regulates the airflow entering the engine based on the accelerator pedal posi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos