Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on the Mercedes E-Class

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Service warning light

Follow these steps to reset the engine oil maintenance light on the Mercedes E-Class. First, get in the vehicle and turn the ignition to the second position; then press the zero button located on the left side of the instrument cluster twice, as shown in the video. At this point, turn off the ignition and hold the button while turning the ignition back on; wait about ten seconds to complete the reset procedure for the engine oil light!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Reset the SRS System of the Mercedes E-Class W211
How to Remove and Reset the SRS System of the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. system (SRS) warning light of the Mercedes E-Class W211, following the instructions below. To reset the SRS light, it will be necessary to connect.. …
How to Reset the "Service" Light on a Mercedes E-Class?
How to Reset the "Service" Light on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To reset the "Service" light on a Mercedes E-Class, start by turning on the car without starting the engine. Use the buttons on the steering wheel.. …
Guide to Resetting the Service Light on the Mercedes E-Class
Guide to Resetting the Service Light on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. routine maintenance oil change on the Mercedes E-Class. First, get in the vehicle and turn on the ignition; then go to the onboard computer settings and.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos