Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing Vacuum Pump

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Pump

The central locking system on many Mercedes models is operated by a vacuum pump that activates various devices; it is generally located on the side, in the rear boot, beneath the carpet lining: therefore, remove the plastic boot trim and then the carpet lining to reach the pump, unscrew the relevant fixing pins, pull it from its housing, and disconnect both the connectors and the various tubes. Overall, this is a fairly simple operation that does not require special tools or precautions and can be easily done as a DIY task.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Clk (1997-2003 / A208, W208, C208) If you want to bleed the brake system to remove any air bubbles or simply replace the brake fluid, it is very useful to use a vacuum pump to suck the…
Mercedes Clk (1997-2003 / A208, W208, C208) Dismantling the front headlamp unfortunately requires removing the bumper to access the relevant mounting pins; it is therefore suggested to place th…
Mercedes Clk (1997-2003 / A208, W208, C208) If you need to remove the radiator, ensure the engine has cooled down as you will first need to drain the coolant. Start by removing the splash guard…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos