Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Windscreen Washer Reservoir

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Windshield wipers

To remove the windscreen washer reservoir, follow these steps; open the front bonnet and locate the reservoir on the driver's side just behind the ABS pump; disconnect the level sensor connector, pull the pump out from the bottom without disconnecting the power supply, free the hoses along the clips on the side of the reservoir, and then detach them from the metal fittings near the filler cap; remove the aluminium cover on the side to extract the other pump and complete the removal of the reservoir.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Disassembling Windscreen Washer Hoses and Nozzles
Instructions for Disassembling Windscreen Washer Hoses and Nozzles
Mercedes Clk (1997-2003 / A208, W208, C208) If you need to replace the hoses that carry the washer fluid from the reservoir to the nozzles, follow these steps: disconnect the hose from the rese…
Replacing the Windscreen Wiper Fuse
Replacing the Windscreen Wiper Fuse
Mercedes Clk (1997-2003 / A208, W208, C208) If the wiper system does not work or the pump located in the washer fluid reservoir does not activate to release water from the nozzles, the first th…
How to Add Antifreeze to Your Car
How to Add Antifreeze to Your Car
Mercedes Clk (1997-2003 / A208, W208, C208) With the arrival of winter and frost, your car requires attention to avoid compromising its performance. One of these tasks is to fill the radiator w…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos