Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling Windscreen Washer Hoses and Nozzles

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Windshield wipers

If you need to replace the hoses that carry the washer fluid from the reservoir to the nozzles, follow these steps: disconnect the hose from the reservoir and the nozzle, insert a reinforcement, such as a piece of wire, into one end of the old hose, tie the new hose to it, and pull it through its path. Essentially, use the old hose as a guide to allow the new piece to be inserted. The nozzles are fixed to the bonnet with a plastic tab; simply push it in to release them.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling Windscreen Washer Nozzles
Dismantling Windscreen Washer Nozzles
Mercedes Clk (1997-2003 / A208, W208, C208) If you habitually fill the windscreen washer reservoir only with water and not with the appropriate detergent, it may happen that limescale blocks th…
Removal of Windscreen Washer Reservoir
Removal of Windscreen Washer Reservoir
Mercedes Clk (1997-2003 / A208, W208, C208) To remove the windscreen washer reservoir, follow these steps; open the front bonnet and locate the reservoir on the driver's side just behind the AB…
Replacing the Windscreen Wiper Fuse
Replacing the Windscreen Wiper Fuse
Mercedes Clk (1997-2003 / A208, W208, C208) If the wiper system does not work or the pump located in the washer fluid reservoir does not activate to release water from the nozzles, the first th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos