Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Jack on a Mercedes C-Class W202

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Checks and maintenance

To use the jack, the Mercedes C-Class has a designated housing, which you can access by removing a small cover. This is specifically designed to insert the jack without damaging the bodywork. First, ensure the parking brake is firmly engaged, and then block the wheels to prevent rolling. Before lifting the car, loosen the wheel nuts slightly. The jack is located in the trunk, under the carpet cover, and the handle serves as a hook to hold the cover up. In the bag, you will find a wheel wrench and a centering pin. Installing the jack is quite simple; remove the cover from the attachment point mentioned earlier and insert the jack. Remember that the centering pin is necessary when replacing the wheel. To lower the wheel, simply do the opposite of what you just did. When tightening the bolts, do not over-tighten; just ensure they are securely closed.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Operation of the SRS in the Mercedes C-Class W202
Operation of the SRS in the Mercedes C-Class W202
Mercedes Classe C (1993-2000 / W202) .. characteristics of the airbags of the Mercedes C-Class W202 version are illustrated: the airbags are present on both front seats, which is not a given.. …
How to Reset the Service Light on a Mercedes Benz C-Class
How to Reset the Service Light on a Mercedes Benz C-Class
Mercedes Classe C (1993-2000 / W202) Resetting the service light on a Mercedes Benz C-Class, model W202, is a very simple operation that can be done independently, aided by our short vid…
How to Replace the Serpentine Belt on the Mercedes-Benz C-Class W202
How to Replace the Serpentine Belt on the Mercedes-Benz C-Class W202
Mercedes Classe C (1993-2000 / W202) .. belt or alternator belt on the Mercedes-Benz C-Class W202, second generation. First, open the hood of your car and start by loosening the belt tensioner.. …

Other guides you may be interested in

How to Replace the Key Battery in a Skoda Karoq

Replacing the button battery in your new Skoda Karoq key takes just a few minutes and can be done independently. Simply follow these steps. First, press the lower button of the cover while simultaneously pulling out the physical emergency key. Then, using a small flat screwdriver, remove the rear cover to access the exhausted battery. Remove the old battery and replace it with a new compatible model (CR2032). Finally, reattach the rear cover and insert the physical key back in.

Watch the video!


by ScegliAuto

More videos