Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radio Button Fixing Instructions

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

If the radio button detaches due to the breakage of the upper mounting tabs, you can reattach it using specific plastic adhesive: this is a special glue with elastic properties, allowing it to secure the component while permitting slight movements, just enough to enable the button activation.

Remove the button, apply small drops of glue on the upper edge, and reinsert the button into its place, allowing the glue to dry. Once the glue has cured, the button will stay in place and continue to function.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Mercedes Classe C (2000-2007 / W203) Removing the original car radio requires taking out other elements of the center console: start by prying off the air vents using a flathead screwdri…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Mercedes Classe C (2000-2007 / W203) Removing the original car radio requires taking off the entire trim of the center console and tunnel. Start by removing the air vents: use a screwdri…
How to Remove the Radio from a Mercedes-Benz C-Class
How to Remove the Radio from a Mercedes-Benz C-Class
Mercedes Classe C (2014-2021 / W205) To remove the radio from a Mercedes-Benz C-Class, first press the button located under the gear shift to open the glove compartment in the center con…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos