Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sl
    4. : Instructions for removing the internal rearview mirror support

Mercedes Sl - Video tutorial

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Soft top
Operation: Instructions for removing the internal rearview mirror support

The video shows the disassembly of some internal elements of a car certainly being demolished or in any case completely disassembled since there are many elements of the interior that are missing; in any case, to be able to disassemble the internal rear-view mirror support, simply lever from the rear towards the front in order to release the spring balls of the support itself; after which, if you also want to remove the ceiling light, you must first remove the interior lights glass by levering with a plastic spatula in order to access the screws below.


Posted on 25 August 2023 by ScegliAuto



Repair outside rearview mirror
Mercedes Sl (1989-2001 / MK 5, R129) In order to disassemble the external rear-view mirror it is necessary to remove the triangular-shaped plastic covering which is right in corresponden
Internal hood lining arrangement
Mercedes Sl (1989-2001 / MK 5, R129) Over time, the internal covering of the hood can give way, no longer adhering perfectly and assuming a wavy effect: it is possible to intervene in or
Replacement of the sun visor support mask cap
Mercedes Sl (1989-2001 / MK 5, R129) In case of breakage of the cap that acts as a mask for the sun visor support, it can be replaced very easily: unhook what remains of the old cap to a

    Frequently Asked Questions

    • Sl 1989-2001 - How much does the key to release the soft top cost for Mercedes Sl r129? Read Answer
    • Sl 1989-2001 - Which keys to use to unlock the Mercedes w129 soft top? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos