Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil filter on the Mercedes W201

Model: Mercedes 190 W201 - Years 1982-1993
Part: Oil filter

Replacing the engine oil filter and the oil itself is a fairly simple task that you can carry out independently by following our guide and the video tutorial. The first steps are to open the bonnet and the oil filler cap before lifting the car. After lifting the car, clean the sump plug with a cleaner and then remove it to drain the entire oil reservoir. Proceed to the second step, which is to remove the oil filter; you must first lower the car and unscrew the bolt that secures it. Use a 76mm spanner to remove the filter. Lubricate the new filter and install it on the vehicle. Refit the bolt and proceed to fill the oil reservoir. You will need 5 litres of oil. Once added, close the cap.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bonnet Struts on a Mercedes W201
How to Replace the Bonnet Struts on a Mercedes W201
Mercedes 190 (1982-1993 / W201) Replacing the bonnet struts on the Mercedes 190 model W201 is straightforward. First, lift the front bonnet and secure it at the sides with wooden st…
How to Replace the Air Filter on the Mercedes W201
How to Replace the Air Filter on the Mercedes W201
Mercedes 190 (1982-1993 / W201) Today, with the help of the following video tutorial, you will learn how to replace the air filter on the Mercedes 190, model W201. The first step is…
How to Replace the Front Headlamp of a Mercedes W201
How to Replace the Front Headlamp of a Mercedes W201
Mercedes 190 (1982-1993 / W201) To replace the front headlamp of a Mercedes W201 (190E), open the bonnet and locate the upper fixing points of the headlamp unit. Remove the front gr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos