Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Sl
  6. : Replacement of the sun visor support mask cap

Mercedes Sl - Video tutorial

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Soft top
Operation: Replacement of the sun visor support mask cap

In case of breakage of the cap that acts as a mask for the sun visor support, it can be replaced very easily: unhook what remains of the old cap to access the underlying support and unscrew the two fixing screws and be able to remove the sun visor from its seat; at this point release the seeger that holds the support in position, remove the support itself and then the cap; insert the new one, reposition the support and secure it with the relative seegere; then proceed backwards fastening the sun visor with the two screws and then hook the new cap to hide both the support and the screws.


Posted on 31 August 2023 by ScegliAuto



Replacement of front shock absorber supports
Mercedes Sl (1989-2001 / MK 5, R129) If you hear a creaking coming from the engine compartment, especially when driving on the bumpy road, it is likely that the front shock absorber supp
Cup holder support installation
Mercedes Sl (1989-2001 / MK 5, R129) Inside the storage compartment in the central tunnel, immediately behind the ash-laying, it is possible to insert a useful accessory: the food holder
Interior led lights installation
Mercedes Sl (1989-2001 / MK 5, R129) To install a LED bulb to rear light the headlight switch knob, proceed as follows: first unhook the knob by turning it all the way to the right and p

    Frequently Asked Questions

    • Sl 1989-2001 - How much does the key to release the soft top cost for Mercedes Sl r129? Read Answer
    • Sl 1989-2001 - Which keys to use to unlock the Mercedes w129 soft top? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos