Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery for the Mercedes-Benz C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Key

See other generations:
Video tutorial

It may happen that suddenly the remote for your vehicle stops working, almost certainly due to a dead battery. This video tutorial shows how to replace it by following the steps described below: Remove the key from the remote by disengaging the latch, and use it to pry open the designated slot until you see the electronic circuit board where the battery is located.

Gently extract the battery and replace it with one of the same specifications; there is an identification code engraved on the back to avoid mistakes. Job complete.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery for the Mercedes-Benz C-Class W206
How to Replace the Key Battery for the Mercedes-Benz C-Class W206
Mercedes Classe C (2021-2026 / W206) .. to replace the button battery in your Mercedes-Benz C-Class W206 key. First, make sure you have a new CR2032 battery. Then, locate the button on the.. …
How to Replace the Remote Battery for the Mercedes-Benz C-Class
How to Replace the Remote Battery for the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. the battery in the remote for the Mercedes-Benz C-Class, press the button located at the base of the device to extract the key from its housing... …
Where is the Auxiliary Battery Located in a Mercedes-Benz C-Class?
Where is the Auxiliary Battery Located in a Mercedes-Benz C-Class?
Mercedes Classe C (2014-2021 / W205) .. see where the battery is located in a Mercedes-Benz C-Class, which is useful if you need to replace it. As shown, the battery is inside the cabin, specifically.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos