Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Suspension Springs

Model: Mercedes Viano W639, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Suspension system

Video tutorial

To replace the front suspension springs, you first need to have the appropriate clamps to compress the spring on the shock absorber. You will also need to remove several components from the vehicle to access the shock absorber mount.

Start by lifting the vehicle, removing the front wheel, and the bolts securing the shock absorber to the hub support. Then lower the vehicle to access the engine bay. To reach the strut top, remove the plastic grille located just below the windscreen, along with the wiper arms and the wiper mechanism.

At this point, you can access the strut top and remove the nut securing the shock absorber mount to complete its removal. Now, apply the clamps to the spring to compress it and detach the mount from the shaft.

Next, apply the clamps to the new spring and fit it onto the shock absorber along with the dust cover and mount, then proceed in reverse order for installation back onto the vehicle.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Suspension on a Mercedes Viano W639
Replacing the Rear Suspension on a Mercedes Viano W639
Mercedes Viano (2003-2013 / W639, MK 1) In this video tutorial, follow step-by-step instructions to remove and replace the rear suspension on a Mercedes Viano W639. First, lift the vehicle …
Replacement of Front Shock Absorbers
Replacement of Front Shock Absorbers
Mercedes Viano (2003-2013 / W639, MK 1) When replacing the front shock absorbers, consider the need for appropriate clamps to compress the springs. Start by lifting the vehicle on a ramp an…
Where are the Fuses in a Mercedes Viano?
Where are the Fuses in a Mercedes Viano?
Mercedes Viano (2003-2013 / W639, MK 1) To manage the operation of devices installed on the Mercedes Viano, locate the fuses in the designated boxes mounted on the vehicle: this type of veh…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos