Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driver's Door Lock in the Mercedes ML350?

Model: Mercedes Classe M W164 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door lock

See other generations:
Video tutorial

In this tutorial, you can see how to replace the driver's door lock in the Mercedes ML350, a very simple and quick operation. First, open the door in question, then using a flat-head screwdriver or preferably a plastic spatula, unclip both the reflector panel and the right rubber cap. Next, unscrew the indicated screw using a long Torx screwdriver with a T20 tip, grasp the lock cylinder, pull it outwards, and remove it from the door.

To fit the replacement, simply follow the reverse procedure.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Mercedes ML350?
How to Reset the Tyre Pressure Light on a Mercedes ML350?
Mercedes Classe M (2011-2018 / W166) In this tutorial, you will see how to reset the tyre pressure light on a Mercedes ML350, a very simple and quick operation to perform only once the c…
How to Replace the Auxiliary Battery in the Mercedes-Benz ML350 W166?
How to Replace the Auxiliary Battery in the Mercedes-Benz ML350 W166?
Mercedes Classe M (2011-2018 / W166) The auxiliary battery of the Mercedes-Benz ML350 W166 is located in the boot. If you need to replace it, open the tailgate and you will notice a smal…
How to Reset the Service Light on a Mercedes ML
How to Reset the Service Light on a Mercedes ML
Mercedes Classe M (2005-2011 / W164) In this video, see how to reset the service light on a Mercedes ML350, regardless of the type of service, whether it is service A, B, or C. Get in th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos