Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses of the Mercedes Sprinter 316

Model: Mercedes Sprinter MK 1, W901 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuse box

See other generations:
Video tutorial

The fuse boxes of the Mercedes Sprinter are located one under the driver's seat (for left-hand drive vehicles). To access it, find a small cover on the step of the driver's side, remove it, and you will find the fuse box. The other fuse box is located to the left of the clutch pedal, covered by a small flap.

Once you remove the flap, lower it to reach the second fuse box. If you need to replace a fuse, identify it based on the faulty component, grasp it, pull it out, and check if the link inside is intact. If the link is broken, the fuse needs to be replaced with one of the same amperage.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

In the Mercedes Sprinter 316, where is the fuse box located?
In the Mercedes Sprinter 316, where is the fuse box located?
Mercedes Sprinter (2006-2018 / MK 2, W906) Any electrical failure inevitably leads to dealing with the fuse box. Inside, there are the fuses connected and intended for protection against overl…
Where to find and how to access the fuse box of a Mercedes Sprinter?
Where to find and how to access the fuse box of a Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / MK 1, W901) Hello and welcome to Scegliauto.com! In this guide, you will discover where the fuse box of your Mercedes Sprinter is located. Start by getting into …
Where Are the Fuses on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) The fuses for the Mercedes Sprinter are located within two fuse boxes installed inside the vehicle: both are found within the cabin. The first box is…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos