Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Steering wheel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the steering wheel on a Mercedes C-Class, a very simple and quick operation. Before doing this, open the hood and disconnect the negative terminal of the battery to work safely.

Start by going inside the cabin, then locate the two holes at the back of the steering wheel. Insert a thin screwdriver into them and release the airbag locks.

Once the airbag is removed, disconnect the connector and remove the large central bolt with a 16mm hex wrench. At this point, the steering wheel is free to be removed from the steering column.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel of the Mercedes C-Class
Removing the Steering Wheel of the Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. and replace the steering wheel of the Mercedes C-Class, following the instructions below. First, get inside the vehicle and start by removing the steering.. …
Guide to Removing the Steering Wheel on the Mercedes-Benz C-Class
Guide to Removing the Steering Wheel on the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. the steering wheel on the Mercedes-Benz C-Class. First, get inside the vehicle and start by removing the airbag from the steering wheel by pushing.. …
How to Remove the Steering Wheel of the Mercedes C-Class
How to Remove the Steering Wheel of the Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. and replace the steering wheel of the Mercedes C-Class by following the instructions below. First, get inside the vehicle and start by removing the airbag.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos