Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Headlight

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light bulb

See other generations:
Video tutorial

Removing the rear headlight on this car model is not a straightforward task; you need to disassemble several components before reaching the headlight mounting nuts. Start by opening the trunk and removing the cover from the support area.

Next, take out the push clips that secure the plastic trim known as the luggage cover and remove it by disconnecting the courtesy light connector. Then, move the side carpet covering to access all the headlight mounting nuts.

You will also need to remove the air suspension reservoir to gain full access. Only then can you remove the headlight by disconnecting its power connector.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on a Mercedes E-Class
Replacing the Headlight Bulb on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) In this video tutorial, you will find the main instructions to remove and replace the headlight bulb on a Mercedes E-Class. First, open the hood of t…
Instructions for Removing the Headliner on Mercedes E-Class W212
Instructions for Removing the Headliner on Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) In today's tutorial video, you will see the main instructions for removing the interior headliner on a Mercedes E-Class W212, fifth generation. First…
Instructions for Removing Rear Shock Absorbers
Instructions for Removing Rear Shock Absorbers
Mercedes Classe E (1995-2002 / W210) Removing the rear shock absorbers is fairly simple since the shock and spring are not co-axial, as in the case of the front ones, but separate: it is…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos