|
Do it yourself
| |||
| ||||
How to reset the service light on a 2018 Mercedes Vito?
Model: Mercedes Vito
MK 3, W447
- Years 2014-2024
This video shows the step-by-step procedure to reset the maintenance light on the Mercedes Vito model 447 produced from 2014. This procedure is useful if the light remains on after a service due to the control unit not detecting it. To perform this procedure, first, turn the ignition on by turning the key to the first position. Then, press the arrow button located at the bottom left of the steering wheel until the total and partial mileage of the vehicle is displayed. At this point, press the call button and then the OK button until the vehicle data menu, roller test, and Assyst Plus appear on the display. Use the up or down arrow buttons to scroll to Assyst Plus, press OK, select general maintenance, and press OK. Now confirm by pressing OK. In the maintenance menu, select yes, then confirm the reset by pressing OK. You can now go back using the arrow buttons and restart the ignition to check that the reset was successful.
Updated on 4 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Vito
(2014-2024 /
MK 3, W447)
To correctly reset the service light on your 2018 Mercedes Vito Mk3, follow a procedure similar to that used in many other Mercedes cars and commerci…
Mercedes Vito
(2003-2013 /
W639, MK 2)
This article explains how to reset the maintenance light on a 2008 Mercedes Vito if the reset is not performed by the workshop during the service. Fi…
Mercedes Vito
(2014-2024 /
MK 3, W447)
This tutorial video shows how to reset the service light on a 2016 Mercedes Vito. This procedure is necessary if the light remains on after the servi…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.354
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |