Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Starter motor protection fuse replacement

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Starter motor
Operation: Starter motor protection fuse replacement

If it happens that while turning the ignition key the starter motor does not operate, it is not certain that it is a real failure of the motor itself: in fact, it is first necessary to check if the low pressure pump in the fuel tank is activated and then inspect the fuse box; this is located in the engine compartment, behind the left shock absorber dome (driver's side) and the starter motor protection fuse is located in the center of the box and has a capacity of 15 A: by extracting the fuse, it breaks ; replace the fuse and check the oxidation state of the relay holder.


Posted on 14 September 2023 by ScegliAuto



Mercedes E-Class 220 W210 starter motor replacement
Mercedes Classe E (1995-2002 / W210) Today we will see how to remove the starter motor of a Mercedes E-Class 220 W210. First we go to open and lift the engine hood: then we remove the pl
Remove the starter motor on Mercedes E
Mercedes Classe E (2009-2016 / W212) Does the machine have ignition problems? Does the starter motor not work? Let's replace it. With a socket wrench we disconnect the cables of the car
How to replace the starter motor in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) In this tutorial, we can see how to replace the starter motor in the Mercedes E-Class, a simple operation that requires good manual dexterity. First

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos