Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Mercedes SLK 350

Model: Mercedes Slk R172, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

Let's see how to perform a service reset on a Mercedes SLK (2011-2016). Begin the procedure by turning on the vehicle's instrument panel without starting the engine. Then, simultaneously press and hold the "OK" button on the left side of the steering wheel and the phone button on the right side to open the menu on the information display.

Once done, select the options "ASSYST PLUS", "FULL SERVICE", "CONF. FULL SERVICE", then select the grade of oil used for the service and finally confirm the entire operation to reset the service light.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Remove the Power Steering Pump from a Mercedes SLK 350 Petrol
How to Remove the Power Steering Pump from a Mercedes SLK 350 Petrol
Mercedes Slk (2004-2011 / MK 2, R171) In today's video, you will see the main instructions to dismantle and replace the power steering pump of a Mercedes SLK 350 petrol. First, open the b…
How to replace the fog light bulb of the Mercedes SLK 350
How to replace the fog light bulb of the Mercedes SLK 350
Mercedes Slk (2004-2011 / MK 2, R171) In the following guide, we will describe the steps you need to follow in order to safely replace the fog light bulb of your Mercedes SLK 350. First o…
How to reset the service in the Mercedes SLK?
How to reset the service in the Mercedes SLK?
Mercedes Slk (2011-2016 / R172, MK 3) In this tutorial, we will see how to reset the service indicator in the Mercedes SLK, a very simple and quick operation that should be done only afte…

Other guides you may be interested in

    Frequently Asked Questions

    • Slk 1997-2004 - What warning lights are there in the dashboard of the Mercedes SLK? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos