Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan in a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, you will see how to remove the cabin fan in a Mercedes E-Class, a very simple and quick operation. First, ensure that the key is not inserted.

Then, go to the passenger seat and, using a Torx T25 wrench, remove the panel located under the glove compartment. Next, disconnect the power connector from the fan, grasp the fan, and pull it out of the housing by turning it clockwise.

At this point, simply insert the replacement if needed and reassemble everything by following the reverse procedure.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to remove the cabin fan from the Mercedes E-Class
How to remove the cabin fan from the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the cabin fan of the Mercedes E-Class. First, open the front door on the passenger side and start removing the cover located under the.. …
How to Remove the Cabin Air Fan on a Mercedes E-Class
How to Remove the Cabin Air Fan on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. How to remove the cabin air fan on a Mercedes E-Class. In this video, see how to perform the disassembly. Use a lever to remove the plastic cover under.. …
Disassembly and Replacement of the Cabin Fan on a Mercedes E-Class
Disassembly and Replacement of the Cabin Fan on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. and replace the cabin fan on a Mercedes E-Class. First, get inside the cabin and remove the plastic cover located under the glove compartment by.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos