Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter of the Mercedes B-Class 1.5

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

Below are the instructions that will allow you to remove and replace the fuel filter of the Mercedes B-Class 1.5. First, open the bonnet of the vehicle and start to remove the plastic cover; then disconnect the metal clips of the fuel lines, as shown in the video.

At this point, disconnect the electrical connector and unscrew the fixing screws of the fuel filter, removing it and replacing it with the new original one; reassemble and carry out the various connections of the fuel lines, applying the reverse procedure!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Air Conditioning in a Mercedes B-Class
How to Replace the Air Filter of the Air Conditioning in a Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) Before starting, enter the cabin of your Mercedes B-Class. Begin by unfastening the clips that secure the cover of the air conditioning air filter, t…
How to Replace the Cabin Filter on a Mercedes B-Class?
How to Replace the Cabin Filter on a Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) You can replace the cabin filter on a Mercedes B-Class by opening the bonnet to access the upper part of the engine compartment: immediately below th…
Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class
Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) Replacing the timing belt is a complex operation that requires time and patience; this guide will outline some important information to assist you in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos