|
Do it yourself
| |||
| ||||
Replacing the Auxiliary Battery on the Mercedes GLC
Model: Mercedes Glc
C253, X253, MK 1
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
In this video, you will learn how to replace the auxiliary battery on the Mercedes GLC: the module is located under the passenger side mat, but you also need to remove the door seal, which should be done carefully to avoid damaging the rubber clips underneath. You will also find some Torx screws under the glove compartment, from which you need to disconnect the light connector. Once the lower part of the glove compartment is removed, you can also take off the upper part of the mat in the passenger footwell, where you will find three bolts to remove, allowing you to lift a cover. Underneath, you will find the auxiliary battery, more accurately referred to as the "control module." Remove the connecting bolt and the electrical connector. The Mercedes part number is A2059052809, and you can find it on Amazon with the code B07TP29R9B for $34.50, with free shipping for Prime members. Reconnect it first with the connector and then with the bolt, and then replace all covers in reverse order: reinstall the lower part of the glove compartment and then the mat, and the job is complete.
Updated on 14 September 2026 by ScegliAuto
Related tutorials
Mercedes Glc
(2015-2022 /
C253, X253, MK 1)
Let's see how to replace the auxiliary battery on a Mercedes GLC. Open the car's door and lift the floor covering to find the auxiliary battery. Once…
Mercedes Glc
(2015-2022 /
C253, X253, MK 1)
The auxiliary battery on a Mercedes GLC is located inside the cabin. To access it, fold down the rear seatbacks to expose the screws securing the cus…
Mercedes Glc
(2015-2022 /
C253, X253, MK 1)
In this video, you can see where the auxiliary battery is located in the Mercedes GLC, useful in case you need to replace it or simply recharge it. A…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |