Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the lock cylinder of the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door lock

See other generations:
Video tutorial

Today we will see the instructions that will allow you to dismantle and replace the lock cylinder of the Mercedes Sprinter. First, open the front door of the vehicle and begin unscrewing the side screw of the lock cylinder using a key or a Torx screwdriver with an extension; then gently remove the lock cylinder, as illustrated in the video.

At this point, remove the entire door handle if necessary, then refit the cylinder and securely fasten the side screw of the door; finally, check the operation!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Positioning and disassembly of the internal fuse box of the Mercedes Sprinter.
Positioning and disassembly of the internal fuse box of the Mercedes Sprinter.
Mercedes Sprinter (2006-2018 / MK 2, W906) The information provided in this guide will show us the positioning and disassembly of the internal fuse box of the Mercedes Sprinter. First, we open…
Removing the Cooling Radiator on the Mercedes Sprinter MK1
Removing the Cooling Radiator on the Mercedes Sprinter MK1
Mercedes Sprinter (1995-2006 / MK 1, W901) In this video tutorial, you will see the main steps to remove and replace the cooling radiator on the first generation Mercedes Sprinter. Before proc…
Removing the Door Panel of a Mercedes Sprinter
Removing the Door Panel of a Mercedes Sprinter
Mercedes Sprinter (1995-2006 / MK 1, W901) In this video, see how to remove the front door panel of a Mercedes Sprinter in simple steps. First, open the door and remove the lower plastic cover…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos