Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the EIS Module from the Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013

Briefly review the instructions to remove and replace the ignition cylinder or EIS module of the Mercedes C-Class. First, get inside the vehicle and start by detaching the plastic cover located behind the steering wheel and on the dashboard; then, disconnect and remove the ignition cylinder by unplugging the electrical connector found on the back, as shown in the video. At this point, replace the EIS module along with the ignition key, reassembling everything on the dashboard, following the video tutorial to the end!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the Becker Map Pilot module on the Mercedes C-Class?
How do you replace the Becker Map Pilot module on the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. the Becker Map Pilot module on the Mercedes C-Class, you need to open the glove compartment on the passenger side: at the top of the compartment, you.. …
How to Replace the ABS Module on a Mercedes C-Class?
Mercedes Classe C (1993-2000 / W202) .. To replace the ABS module on a Mercedes C-Class, open the hood to access the engine compartment. It is located in the upper right corner of the.. …
Replacing the Transmission Control Module on the Mercedes C-Class W203
Replacing the Transmission Control Module on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. transmission control module on the Mercedes C-Class W203, as well as on other models from the manufacturer (such as the A-Class W163). First, disconnect.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2021-2028 - Why isn't the car radio working in a Mercedes C-Class? Read answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class W204 B service cost? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos