Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel Airbag in a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Airbag

See other generations:
Video tutorial

In this tutorial, you will see how to replace the steering wheel airbag in a Mercedes E-Class, a very simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery to avoid accidental deployment of the airbag.

Start by going inside the cabin, then locate the two holes on either side of the steering column and insert a Torx T25 wrench into them. At this point, release the retaining clips by prying them, remove the airbag from the steering wheel, and disconnect the power connector.

To install the replacement, simply follow the reverse procedure.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to disconnect the airbag in the Mercedes E-Class
How to disconnect the airbag in the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. remove the driver-side airbag in the Mercedes E-Class. To perform the removal, get inside the vehicle and rotate the steering wheel 180 degrees to insert.. …
How to Remove the Turn Signal Switch on a Mercedes E-Class
How to Remove the Turn Signal Switch on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. to remove the turn signal switch on a Mercedes E-Class? Let's see how to proceed with the disassembly. Before removing the car's steering wheel, disconnect.. …
How to Remove the Steering Lock Module of the Mercedes E-Class?
How to Remove the Steering Lock Module of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. the steering lock module of the Mercedes E-Class, first remove the front airbag located on the steering wheel by loosening the screws at its rear... …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos