Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Check Engine Light on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

To perform this simple maintenance, just follow this brief guide. Enter your vehicle from the driver's side and close the door.

Insert the key into the ignition and turn it to the on position. Now, press the "OK" button located on the steering wheel.

Next, press and hold the button with the phone icon. While holding this button, press and hold the "OK" button until the message on the screen changes.

Use the arrow keys to scroll down to "ASSYST PLUS" and press OK. Now, go to the "FULL SERVICE" option and press OK again. Scroll down with the arrow keys to "CONFIRM FULL SERVICE" and press OK once more.

Now all that's left is to confirm.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. the check engine light on the Mercedes-Benz C-Class. To reset the check engine light, you need to use a diagnostic tool connected to the vehicle's.. …
Mercedes Classe C (2014-2021 / W205) .. reset the service light on the Mercedes-Benz C-Class, get in and turn on the ignition without starting the engine. Use the controls on the steering.. …
Mercedes Classe C (2007-2013 / W204) .. To reset the TPMS light on a Mercedes C-Class, get in the vehicle and turn on the ignition without starting the engine. Use the steering wheel.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read answer

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos